Premium Refractory Anchors for High-Temperature Industrial Applications
1ST STANDARD V-ANCHOR (TYPE V-1)
AVAILABLE SIZE: 3mm - 12mm MAX TEMPERATURE: 1150°C KEY APPLICATION: Furnace wall castable linings, light to medium density.
2ND FLEXIBLE LEG-ANCHOR (TYPE V-2)
AVAILABLE SIZE: 5mm - 10mm MAX TEMPERATURE: 1150°C KEY APPLICATION: Cycle Thermal Expansion Zone, High Concrete Load.
3RD EXTENDED REACH V-ANCHOR (TYPE V-E)
AVAILABLE SIZE: 6mm - 12mm MAX TEMPERATURE: 1200°C KEY APPLICATION: Dual-layer insulation setups with dense hot-face refractory.
4TH HEAVY DUTY Y-ANCHOR (TYPE Y-H)
AVAILABLE SIZE: 8mm - 16mm MAX TEMPERATURE: 1150°C KEY APPLICATION: High vibration zones, rotary kiln nose rings, heavy castables.
Specialized Refractory Anchors
5TH BROAD SPREAD Y-ANCHOR (TYPE Y-B)
AVAILABLE SIZE: 6mm - 12mm MAX TEMPERATURE: 1150°C KEY APPLICATION: Large area roof anchoring, high-volume anchoring block systems.
6TH CORRUGATED Y-ANCHOR (TYPE Y-C)
AVAILABLE SIZE: 6mm - 10mm MAX TEMPERATURE: 1100°C KEY APPLICATION: High gas velocity chambers, petrochemical reactor linings.
7TH INDEPENDENT SPLIT ANCHOR
AVAILABLE SIZE: 5mm - 8mm MAX TEMPERATURE: 1150°C KEY APPLICATION: Rapid thermal cycle applications, multi-component backings.
8TH REINFORCED BASE ANCHOR
AVAILABLE SIZE: 8mm - 14mm MAX TEMPERATURE: 1200°C KEY APPLICATION: Automated Stud Welding on high pressure steel boilers/shells.
Advanced Refractory Anchor Solutions
9TH SLIDING BRICK CLAW (TYPE BC-1)
AVAILABLE SIZE: 3mm - 5mm Plate MAX TEMPERATURE: 1100°C KEY APPLICATION: Suspended roof bricks, horizontal expansion joints in kilns.
10TH DOUBLE ANGLE BRICK CLIP
AVAILABLE SIZE: 4mm - 6mm Plate MAX TEMPERATURE: 1150°C KEY APPLICATION: Heavy refractory interlocking brick block systems, side walls.
11TH SPRING TENSION BRICK ANCHOR
AVAILABLE SIZE: 3mm - 5mm MAX TEMPERATURE: 1100°C KEY APPLICATION: Constant tension modular lining blocks, vertical shaft furnaces
12TH ADJUSTABLE WALL TIE ANCHOR
AVAILABLE SIZE: 5mm - 8mm Plate MAX TEMPERATURE: 1150°C KEY APPLICATION: Double walled steel casing ties for specialized glass tanks.
High-Performance Refractory Anchors
13TH CERAMIC FIBER BLANKET CUPLOCK
AVAILABLE SIZE: Standard Sizes Custom Dimensions. MAX TEMPERATURE: 1260°C KEY APPLICATION: Securing layered fiber blanket linings to rigid shell structures. (AVAILABLE IN INCONEL 601 / CERAMIC FOR PREMIUM TEMPERATURE RESISTANCE)
14TH HIGH RADIATION RETAINING WASHER
AVAILABLE SIZE: Standard Size MAX TEMPERATURE: 1300°C KEY APPLICATION: Direct flame zone fiber module clamping and insulation pins. (AVAILABLE IN INCONEL 601 / CERAMIC FOR PREMIUM TEMPERATURE RESISTANCE)
15TH CONTINUOUS WAVE MESH ANCHOR
AVAILABLE SIZE: 4mm - 6mm MAX TEMPERATURE: 1100°C KEY APPLICATION: Concrete gunning and high speed spray linings in ductings.
16TH HIGH AMPLITUDE WAVE ANCHOR
AVAILABLE SIZE: 5mm - 8mm MAX TEMPERATURE: 1150°C KEY APPLICATION: Thick fluid-bed boilers, dense concrete floor sections.
Industrial Refractory Support Systems
17TH VIBRATION CORRUGATED ANCHOR
AVAILABLE SIZE: 6mm - 10mm MAX TEMPERATURE: 1150°C KEY APPLICATION: Cement rotary kilns, raw material blending silo cones.
18TH FOOTED RIBBON WAVE ANCHOR
AVAILABLE SIZE: 4mm - 6mm MAX TEMPERATURE: 1100°C KEY APPLICATION: Fast arc welding setups, repetitive automated lining tracks.
19TH FLAT STRIP LEAF ANCHOR
AVAILABLE SIZE: 2mm - 4mm MAX TEMPERATURE: 1100°C KEY APPLICATION: Lightweight insulating brick backings, backing panel locks.
20TH PERFORATED STRIP ANCHOR
AVAILABLE SIZE: 3mm - 5mm Plate MAX TEMPERATURE: 1150°C KEY APPLICATION: Precast structural refractory block production yards
Engineered Refractory Anchors
21ST COMBINATION UV-ANCHOR
AVAILABLE SIZE: 5mm - 10mm MAX TEMPERATURE: 1150°C KEY APPLICATION: Incinerator chamber roofs, complex multi-angle geometry zones
22ND THREADED BASE SUPPORT STUD
AVAILABLE SIZE: M8 - M16 MAX TEMPERATURE: 1200°C KEY APPLICATION: Foundational support pillars for modular interlocked structures.
23RD SHARP APEX V-ANCHOR
AVAILABLE SIZE: 4mm - 8mm MAX TEMPERATURE: 1150°C KEY APPLICATION: Thin high-velocity gas lines, compact hot-face areas.
24TH BULL-HORN HEAVY SUPPORT ANCHOR
AVAILABLE SIZE: 8mm - 14mm MAX TEMPERATURE: 1200°C KEY APPLICATION: Heavy furnace arch roofs, ladle covers, steel melting zones.
Heavy-Duty Refractory Anchors
25TH CORRUGATED LEG V-ANCHOR
AVAILABLE SIZE: 5mm - 10mm MAX TEMPERATURE: 1150°C KEY APPLICATION: Severe thermal shock zones, aluminum melting furnace walls
26TH HEAVY STAMPED PLATE V-ANCHOR
AVAILABLE SIZE: 3mm - 5mm Plate MAX TEMPERATURE: 1150°C KEY APPLICATION: High load castable suspensions, continuous reheating furnaces
27TH EXTENDED LEG SLOTTED ANCHOR
AVAILABLE SIZE: 6mm - 12mm MAX TEMPERATURE: 1150°C KEY APPLICATION: Petrochemical cracking units, high sulfur fuel burning environments.
